Notícias

Forma Glas makes big further steps in tumbler and stem ware production systems

Even though being in possession of world’s most advanced technology in glass manufacturing, Forma Glas relentlessly continues to improve their machine’s abilities. In order to reach or even exceed customer’s needs, Forma Glas’ management and engineers continuously set new targets.

Picture: Forma Blowing Machine

One of the latest goals was to raise the output rate of future tumbler and stemware lines, whilst reaching even higher product quality. These two objectives used to be in dissent with each other. This was mostly due to the fact that raising the machine’s speed reduces the pressing time for each item, thereby quickly reaching an unbearable level. Thus need for a completely updated setup arose.

One major step to solve this problem was to implement a new stem press with two hydraulic pressing stations. This almost doubles pressing time of each stem, what raises the output rate to a considerably higher level. In order to keep the blowing machine in step with the enhanced stem press, a servo-electric double gob press was also invented and fully implemented. Using double presses in both machines not only helps to raise the maximum output, but also highly improves glass quality. As a result up to 2300 high-level stem ware products or 2700 tumblers can be produced per hour.

Satisfying the demand for high quality post processing machines

Considering the importance of proper post processing systems for producing high quality glassware, Forma Glas recently decided to reenter this market. Currently a new automatic cracking off machine is being built and will be commissioned at the beginning of next year. This machine uses three separate high level lasers, thus allowing cutting rates almost exceeding the output of aforementioned stemware and tumbler line. This machine is now being sold as “ASA – Automatic Crack Off”, available with 15, 28 or 39 stations; depending on the customer’s demands for speed.

Implementing automatic tableware control systems

Manual quality control of tableware products always used to be a high expenditure for all glass manufacturers. Advanced image processing and software technology now allows implementing an automatic tableware control system. In cooperation with external experts, Forma Glas recently put into operation the first fully automatic system, called TCS (Tableware Control System).

TCS uses up to ten cameras. In combination with a sophisticated software solution, thus allowing detecting virtually all possible flaws in different sizes.

Continuing the company’s development towards an all-in-one supplier

Picture: Layout: Stemware / Tumbler / Pressed Item - Line

Putting into operation the first cracking off and tableware control systems puts the company in line with its aim to become an all-in-one supplier for tableware products. By now Forma Glas can provide several kinds of presses, high end blowing machines, stem stretching equipment, flame polishing systems, conveyor belts, cracking off machines and tableware control units. Thereby the company can now provide several machineries necessary for high-end tableware production, except for furnaces.

01.02.2018, Forma Glas GmbH

print

Notícias sobre o material do site é copyright e pertence à empresa ou ao seu fornecedor de terceiros notícia, e todos os direitos reservados. Qualquer usuário que acessa esse material poderá fazê-lo apenas para seu próprio uso pessoal, bem como a utilização desse material é de risco exclusivo do Utilizador. A redistribuição ou exploração comercial de material tal notícia é expressamente proibida. Se tal notícia material é fornecido por um terceiro, cada utilizador concorda em observar e estar vinculado aos termos específicos de utilização aplicáveis a material notícia. Nós não representamos nem endossamos a precisão ou confiabilidade de qualquer informação contida em qualquer notícia ou sites externos referidos na notícia.

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.


Info Grid


Informações de contato

Se você quiser enviar uma mensagem ou ter dúvidas sobre os mecanismos oferecidos, equipamentos ou serviços, por favor clique em "Digite formulário de contato ..." Para enviar a sua mensagem

Digite Formulário de contato

The experts in glass technology

The eXperts in glass technology