21.11.2024, (Siegler Hohlglasservice) (for Sale)
AMC Motor Drive system with Bosch Amplifier and Bosch motors.
We have a few of this systems with up to 6 drives available.
There is also one system with Lenze drives.
Please ask for...
mais
21.11.2024, (Siegler Hohlglasservice) (for Sale)
Used single section IS-machine 4 1/4" SG or DG (single or double gob operation) on cast iron machine bed.
On the pictues is the section not complete.
We have all necessary parts to make it complete according to your needs for SG or DG...
mais
21.11.2024, (Siegler Hohlglasservice) (for Sale)
Single section IS-machine type Emhart EF 4 1/4" DG or SG.
The section is in very good condition and nearly new.
It has never been in production and was just used for training.
It is complete to operate with an electronic timing system (not...
mais
21.11.2024 (for Sale)
We have several used Emhart T-600 V-LAN systems for sale.
As an option Servo Feeder controller (555) or Servo Pusher controller (560 or 860) can be included.
There are also T-600, ETS and Furtonic Timing systems as well as Emhart and Futronic...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
We have the following Emhart 317 Servo Pusher systems for sale:
- for 8 section IS-machine
- for 10 section IS-machine
- for IS-6 for for 6+6 Tandem IS-machine
Included is the control cabinet and Pusher...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
We have several GPS Servo Gob Distributor mechanism for sale.
The Gob Distrilbutor Heads are for DG 4 3/8", TG 3".
There are also GPS / Futronic / Bosch IS-machine Timing- and Motor-Drive-systems available.
Just let us know what you are looking...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
We have 2 piece Emhart 860 Servo Pusher systems for sale.
Both systems are standalone for use with Emhart T-600 V-LAN Timing system.
One cabinet is for 10-section and one for 8-section IS-machine.
There is a set of Pusher mechanism...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
We have a few FUTRONIC CIMOG IS-machine Timing systems for sale.
- Cimog for IS-8
- Cimog for IS-10
Both systems are complete with Hot End console and main cables.
There are also FUTRONIC / GPS AMC Motor Drive systems with Bosch or Lenze motor...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
We have 5 piece of Emhart ETS IS-machine Timing cabinet for machines up to 8 sections for sale.
It is only cabinet, without cables and panels.
There are also Emhart T 600, T 600 V-LAN, Flex-IS and Bottero Timing and machine control systems...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
Emhart Flex-Vector Motor Drive system with 3 or 4 Reliance or Invertron Drive cabinet.
For the systems are also spare drives...
mais
20.11.2024 (for Sale)
Emhart IS-10 TG 85 mm or DG 5" IS-machine for sale.
Wide Uprights, Servo Gob Distributor, FPS system for Plunger up and Counterblow,
26-line electropneumatic valve block, Pantograph Baffle-, CC Invert, CC Take-Out,
Vertiflow Bottomplate...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
EMHART IS-8 TG 85 mm (Tripple gob) for sale.
Machine was only 8 years in operation.
Emhart 535 Servo Gob Distributor with DSS gob delivery system.
FPS system for Plunger up and Counterblow.
26-line electropneumatic Valveblock.
Blowside...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
EMHART IS-8 section TG 85 mm (Tripple gob) and DG 5" for sale.
Machine was since last rebuild only 3 years in operation.
Emhart 535 Servo Gob Distributor with DSS gob delivery system.
FPS system for Plunger up and Counterblow. 26-line...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
Bottero Servo-Feeder electronic Plunger mechanism.
5 piece in good or overhauled condition for sale.
As option are also 3 piece of Bottero Servo Shear mechanism available.
Further is a complete Bottero is a Bottero electronic Timing- and...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
3 piece of Bottero Servo Parallel Shear mechanism for sale.
All in working condition.
As an option we can offer also Bottero Servo Feeder/Plunger mechanism and Bottero Timing- and...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
21 piece of EMHART QC - Plungermechanism 5 1/2" DG (Quick Change, 3000 series) complete with base-plate, foot and hight adjustment.
8 piece of them are in very good condition and the remaining in used condition.
Further we have Plunger...
mais
20.11.2024, (Siegler Hohlglasservice) (for Sale)
We have several used Emhart Feeder 144 in different condition for sale.
There are also the Revolving Tube and Shear mechanisms available. Further are some used Spout Casings for...
mais
19.11.2024, (Siegler Hohlglasservice) (for Sale)
We have many used variable parts for 4 1/4" IS machine.
There are many parts for SG and DG delivery system for overhead Scoop machine, Mold Holders, Plunger Positioners, Baffle, Funnel, Blowhead, Neckring, and Take Out arms.
Further we can supply...
mais
