Trade Market - Todos os Ofertas e Pedidos

16.04.2022 (for Sale)

Glass Spinning Machine for Tableware production

Trademark Euro Glass Machinery - Italy, Model. Gemini 8. 30. Manufactured in 2008. It is an eight-module automatic machine for the production of glass cups and bowls and the processing of round...

mais


    27.09.2022, (Siegler Hohlglasservice) (for Sale)

    AMC Drive system, Futronic GPS Bosch Lenze for glass forming machine , is-machine , is machine

    AMC Motor Drive system with Bosch Amplifier and Bosch motors. We have a few of this systems with up to 6 drives available. There is also one system with Lenze drives. Please ask for...

    mais


      27.09.2022, (Siegler Hohlglasservice) (for Sale)

      FUTRONIC EPRO Timing system for IS machine glass forming machine IS-machine

      Futorninc EPRO IS-machine Timing system cabinet fot up to 12 section for...

      mais


        27.09.2022, (Siegler Hohlglasservice) (for Sale)

        Single section IS machine , glass forming machine , is-machine

        Used single section IS-machine 4 1/4" SG or DG (single or double gob operation) on cast iron machine bed. On the pictues is the section not complete. We have all necessary parts to make it complete according to your needs for SG or DG...

        mais


          27.09.2022, (Siegler Hohlglasservice) (for Sale)

          Single section IS machine Emhart EF 4 1/4" DG or SG , glass forming machine

          Single section IS-machine type Emhart EF 4 1/4" DG or SG. The section is in very good condition and nearly new. It has never been in production and was just used for training. It is complete to operate with an electronic timing system (not...

          mais


            27.09.2022 (for Sale)

            Emhart T 600 V-LAN Timing system, (T-600, ETS, CIMOG, EPRO) for IS machine, glass forming machine

            We have several used Emhart T-600 V-LAN systems for sale. As an option Servo Feeder controller (555) or Servo Pusher controller (560 or 860) can be included. There are also T-600, ETS and Furtonic Timing systems as well as Emhart and Futronic...

            mais


              26.09.2022, (Siegler Hohlglasservice) (for Sale)

              Emhart 317 Servo Pusher system for IS-machine , glass forming machine, is-machine

              We have the following Emhart 317 Servo Pusher systems for sale: - for 8 section IS-machine - for 10 section IS-machine - for IS-6 for for 6+6 Tandem IS-machine Included is the control cabinet and Pusher...

              mais


                26.09.2022, (Siegler Hohlglasservice) (for Sale)

                GPS Servo Gob Distributor for IS-machine , for glass forming machine, is-machine

                We have several GPS Servo Gob Distributor mechanism for sale. The Gob Distrilbutor Heads are for DG 4 3/8", TG 3". There are also GPS / Futronic / Bosch IS-machine Timing- and Motor-Drive-systems available. Just let us know what you are looking...

                mais


                  26.09.2022, (Siegler Hohlglasservice) (for Sale)

                  Emhart 860 Servo Pusher system for IS-machine , glass forming machine, is machine

                  We have 2 piece Emhart 860 Servo Pusher systems for sale. Both systems are standalone for use with Emhart T-600 V-LAN Timing system. One cabinet is for 10-section and one for 8-section IS-machine. There is a set of Pusher mechanism...

                  mais


                    26.09.2022, (Siegler Hohlglasservice) (for Sale)

                    Futronic Cimog IS-machine Timingsystem for glass forming machine , is machine , Epro

                    We have a few FUTRONIC CIMOG IS-machine Timing systems for sale. - Cimog for IS-8 - Cimog for IS-10 Both systems are complete with Hot End console and main cables. There are also FUTRONIC / GPS AMC Motor Drive systems with Bosch or Lenze motor...

                    mais


                      26.09.2022, (Siegler Hohlglasservice) (for Sale)

                      Emhart ETS IS-machine Timing system for glass forming machine, is machine , timingsystem

                      We have 5 piece of Emhart ETS IS-machine Timing cabinet for machines up to 8 sections for sale. It is only cabinet, without cables and panels. There are also Emhart T 600, T 600 V-LAN, Flex-IS and Bottero Timing and machine control systems...

                      mais


                        26.09.2022, (Siegler Hohlglasservice) (for Sale)

                        Emhart Flex Vector Drive system for IS-machine , glass forming machine, is machine, Motor system

                        Emhart Flex-Vector Motor Drive system with 3 or 4 Reliance or Invertron Drive cabinet. For the systems are also spare drives...

                        mais


                          26.09.2022 (for Sale)

                          Emhart IS-10 TG 85 mm or DG 5", IS machine , glass forming machine , IS machine 10 section , 10 sec.

                          Emhart IS-10 TG 85 mm or DG 5" IS-machine for sale. Wide Uprights, Servo Gob Distributor, FPS system for Plunger up and Counterblow, 26-line electropneumatic valve block, Pantograph Baffle-, CC Invert, CC Take-Out, Vertiflow Bottomplate...

                          mais


                            26.09.2022, (Siegler Hohlglasservice) (for Sale)

                            Emhart IS-8 TG 85 mm or DG 5", IS machine , glass forming machine , is 8 section , is-machine

                            EMHART IS-8 TG 85 mm (Tripple gob) for sale. Machine was only 8 years in operation. Emhart 535 Servo Gob Distributor with DSS gob delivery system. FPS system for Plunger up and Counterblow. 26-line electropneumatic Valveblock. Blowside...

                            mais


                              26.09.2022, (Siegler Hohlglasservice) (for Sale)

                              Emhart IS-8 section TG 85 mm and DG 5" , IS machine , glass forming machine

                              EMHART IS-8 section TG 85 mm (Tripple gob) and DG 5" for sale. Machine was since last rebuild only 3 years in operation. Emhart 535 Servo Gob Distributor with DSS gob delivery system. FPS system for Plunger up and Counterblow. 26-line...

                              mais


                                26.09.2022, (Siegler Hohlglasservice) (for Sale)

                                Bottero Servo Feeder / Plunger Mechanism for IS machine , glass forming machine , is-machine , gob

                                Bottero Servo-Feeder electronic Plunger mechanism. 5 piece in good or overhauled condition for sale. As option are also 3 piece of Bottero Servo Shear mechanism available. Further is a complete Bottero is a Bottero electronic Timing- and...

                                mais


                                  26.09.2022, (Siegler Hohlglasservice) (for Sale)

                                  Servo Shear Mechanism, Bottero for IS machine , glass forming machine , is-machine

                                  3 piece of Bottero Servo Parallel Shear mechanism for sale. All in working condition. As an option we can offer also Bottero Servo Feeder/Plunger mechanism and Bottero Timing- and...

                                  mais


                                    26.09.2022, (Siegler Hohlglasservice) (for Sale)

                                    Bottero IS-machine Timing- and Motor-Drive-system for glass forming machine , is machine

                                    Bottero IS-machine Timing- and Motor-Drive-system in working condition for sale. Incuded are EFC 200 (Timing), FMC 450, EGD 450 (Gob Distributor), EPS 500 (Pusher), SFM 450 systems. Further are the main cables, on one side cut and 5 Servo motors...

                                    mais


                                      25.09.2022, (Siegler Hohlglasservice) (for Sale)

                                      IS-machine, variable parts for 4 1/4" DG and SG for glass forming machine , is machine , Mold Holder

                                      We have many used variable parts for 4 1/4" IS machine. There are many parts for SG and DG delivery system for overhead Scoop machine, Mold Holders, Plunger Positioners, Baffle, Funnel, Blowhead, Neckring, and Take Out arms. Further we can supply...

                                      mais


                                        25.09.2022, (Siegler Hohlglasservice) (for Sale)

                                        3 pc. IS machine 6-section, EF 4 1/4, glass forming machine, is-machine , is section , bottle produc

                                        Used 6-section electronic IS-machines type EF 4 1/4". The maschines are from EMHART, Emhart with last rebuild by Heye and BDF. We have also many variable IS-machine parts like Delivery equipment, Baffle-, Funnel-, Blowhead-, Neckring- and...

                                        mais



                                          Info Grid

                                          Filter

                                          Registros
                                           
                                           
                                          Pesquisa
                                           
                                          Lines
                                          Sort by
                                          Direction
                                          Categoria
                                          reset

                                          Global Hollow Glass Market Study

                                          Hollow Glass Market Study