Manchete

Posição Atual

Posições queridos
 

Educação

Sex : Male

Age : 58 years old
Place of birth : Philippines
Citizenship : Filipino

EDUCATIONAL BACKGROUND

Elementary : Cotabato Chinese High School

High School : Cotabato Chinese High School

College : Adamson University
Course : B.S. in Mechanical Engineering

HIGHEST QUALIFICATION OBTAINED
Profession : Mechanical Engineer
Date issue : 1981

Escrever texto de sua aplicacao

I am looking for a challenging opportunity in Container glass industry.

If you are interested in further information, please don´t hesitate to contact me any time.

Habilidades especiais
 

WORK EXPERIENCED
Company : Yuyek Manufacturing Corporation
Country : Republic of the Philippines
Position : Section Head

Company : Apollo Steel Mill
Country : Republic of the Philippines
Position : In - Charge

Company : Asia Brewery, Incorporated
Country : Republic of the Philippines
Year 1982 - 1993
Division : Glass Plant Division
Department : Glass Forming Production Department
Position : Supervisor

Scope of Work:

1. Supervise all personnel under my area of responsibility.
2. Set a goal of 90% pack to pull. And work each day towards this goal.
3. Supervises, organizes, and controls the operation of eight (8) I.S. Machines including forehearths / feeders and annealing lehrs through the optimum use of manpower and resources in attaining the possible highest productivity.
4. Plans, organizes, and controls the activities of job change and start-up to ensure the shortest job change and pick up time.
5. Sets the objectives and direction of workout team in consonance with the acquired foreign technology to meet management commitment for higher productivity and efficiency.
6. Determine the machines and equipments condition report from feedback of Glass Forming Workout Men and/or Line Foremen before a scheduled Job Change and report the same to the services group.
7. Provide technical assistance to Line Personnel, and Services Group in areas related to glass forming operations.
8. Inspect the production line periodically to ensure smooth flow of operation and to see to it that standard quality are maintain at all times.
9. Triggers the acquisition of machine variables (orifice rings, orifice holders, refractory tubes, and plungers, refractory spout, delivery equipments, cooling nozzles, etc.) personnel protective equipments, and other supplies needed by the section.
10. Enforcement of Company Policies, Rules and Regulations.
11. Enforcement of Safety Rules and Regulations.

Accomplishments:

I. 60 - Tons Furnace no. 2 Project
1. Supervised the installation of four (4) Forehearths which includes iron works, sub-and superstructures, refractory channels, combustion and cooling systems.
2. Supervised the over-hauling and installation four (4) feeder mechanism.
3. Commissioning of the above.

II. 200 - Tons Furnace no. 1 Modification and Rehabilitation Project
1. Over-all Adviser in the actual rehabilitation, coordination, and commissioning of four (4) forehearths/feeders, and annealing lehrs.

III.140 - Tons Furnace no. 3 Start-up
1. Commissioning of four (4) BH-F Forehearths/Feeders, two (2)Bottero Machine 8-section Electronic Timing I.S. Machines, and two (2) Bottero Machine 6-section Mechinal Timing I.S. Machines including four (4) 178 Transfer Wheels, and Powers
Stackers.

Company : MahmoodSaeed Glass Industry
Year : 1993 - 1997
Department : Production Department
Position : Forming Manager (Perfume & Cosmetic Bottles, Press Wares,& Containers)

Duties and Responsibilities:

1. The Forming Manager is responsible towards the Factory Manager for:
A. Production efficiency and quality.
B. Good operation of production line.
C. Running the operating personnel.
D. Taking note of the production data according to the stated
procedures and the direction received.
2. He must give instruction to the Specialists and/or Operators or, if necessary, to operate directly to the machine to guarantee the production at the best level.
3. He must maintain a close connection with the Cold End to verify the production quality and to abide promptly the remedies when some repeated defect is checked.
4. He must control, superintend, and instruct the operating personnel at his service so that they performed their duties with the best attention and in respect of their safety rules and plant regulations.
5. He must maintain close connection with the Mold Shop for the routine maintenance of the molds and to make sure that mould parts during production are changed at the stated intervals.
6. Conduct Job On and Job Off meeting.
7. Organizes the inputs of the line personnel and the job change and start-up plans into a single action plan.
8. Evaluates trial-run result based on actual performance and recommend design revisions, if necessary, to improve forming and process capabilities.
9. Provides inputs to mold design and other departments regarding new projects performances and recommend revisions for improvement.
10. Conduct meetings in the analysis of production problems affecting efficiency that involves mold design and machine performance.

Accomplishments:

I. 60-Tons Furnace no. 2 Project.
1. Supervised the installation of two (2) EMHART 6-section Electronic Timing I.S. Machines. Including the operating air piping system, constant cushion pumps and piping system, and automatic Lincoln lubrication pumps and piping system.
2. Supervised the installation of 178 Ware Transfer of one I.S. Machine, and SHEPPEE Ware Transfer on the second I.S. Machine.
3. Supervised the installation of two (2) SHEPPEE Speed Liner Stackers.
4. Assisted in the installation of four (4) SAS Annealing Lehrs.
5. Assisted in the commissioning of the above machines and equipments.

Company : Larsen and Toubro Limited
Year : 1997 - 1999
Position : Production Consultant

Assignment

1. Assist in the operation of working end, forehearths, feeders, I.S. Machines, hot and cold end coatings, and annealing lehrs leading to efficient production process, optimum plant utilisation and excellence in product quality standards.
2. Training of Company´s personnel in the best practices and efficient job change procedures and machine maintenance.

Company : Saudi Arabian Glass Company Limited
Country : Kingdom of Saudi Arabia
Year : January 7, 2000 to October 10, 2000
Position : Unit 1 Manager

Responsibilities

1. Responsible for the production of perfume and cosmetic bottles, and Containers.
2. Responsible for the production of press wares.

Company : Vetroconsult AG
Year : 2001 - 2006
Position : Consultant

Consulting Relationship , Deligence , and Representation :

1. Consultant desires to enter into a Consulting Agreement with Vetroconsult and to provide services for Vetroconsult in Switzerland and abroad.
2. Consultant must personally and carefully perform the job contractually undertaken.
3. Consultant loyally safeguards Vetroconsult´s interest according to the instructions of the competent project manager.

Company : Emhartglass SA
Country : Switzerland
Year : 2002 to 2009
Position : Service Engineer

Assignments :
1. Aligned, check, and test of newly installed machine of the client.
2. Set-up the machine according to client’s first production run.
3. Dry run the machine applying fine tuning prior to production and start-up.
4. Once glass trickles and clean start production run must reach 80% within 10days inclusive 7 days continous at 80% .
5. Other services render as Production Support Specialist as customer may request from company.

Company : Modern Company for Glass Industries
Year : 2009 - 2011
Position : I.S. Production Head

Company : Bottero SpA
Year : 2012 - 2013
Nature of Business : I.S. Machine Assembly
Position : Project Manager, I.S. Machine Assembly

SEMINAR AND TRAINING COURSES ATTENDED

(1) ETU-800 I.S. Machine Electronic Controls and Operation
Country : Cuneo, Italy

(2) Bottle Defects Correction and Technique
Country : Republic of the Philippines

(3) Glass Container Production
Country : Knottingley, United Kingdom

(4) Perfumes, Cosmetics and Press Wares Production
Country : Rioda, Milano and Fidenza, Pharma, Italy

(5) Narrow Neck Press and Blow Production
Country : St. Prex, Switzerland

(6) Pharmaceutical Glass Container Production
Country : Bergantino, Italy

I certify that the above are true and correct to the best of my knowledge and belief.