ANHUA GLASS TOOLS LIMITED

Descrição

Type Size  
BD Polishing Wheel Series
Fine, reflective and clear performance.
Good for using on Shape Machine or single/double round edging machine.
JPG 59.539 byte show
BK Polishing Wheels Series
Good partner to remove lines/marks left by previous diamond wheel processing and get a certain polishing effect.
Black, clear and reflective performance.
JPG 56.525 byte show
Diamond Cutting Disc Series
Diamond cutting disc election according to cutting purpose:
1). For quick cutting purpose
2). For fine cutting purpose
3). For gem cutting purpose
JPG 61.450 byte show
Diamond Drill Series
1/2" GAS BELGIUM screwed sintered diamond glass drill bits
1). Length: 75mm, 95mm,
2). Hole Size: 4 - 75 mm,
3). Sand height: 10 mm,
4). Sand thickness: 0.85 mm,
5). Fixing method: Thread, Cone Shank, Straight Shank,
6). Thread size: 1/2" GAS BELGIUM,
7). Lifespan: It is around 4000pcs 8mm holes that drills 5mm glass on Bevelloin semi-automatic table double drilling machine, for example.
8). Performance: few tiny chips about the rim of hole, even and smooth hole wall,
9). Video: https://www.youtube.com/watch?v=jR6Zv5xwUlA
JPG 67.224 byte show
Glass profile diamond grinding wheel
Shape of trapezoidal edge, pencil edge, OG/2OG/3OG, bull Nose, half bull nose, miter and so on.
Machine of CNC working center (INTERMAC MASTER), shape edge machine (liked SB - 10 Bavelloni), pencil or OG edging machine, or, customized machine.
JPG 175.073 byte show
Diamond cup grinding wheel
Types: Full segments, half segments, inner segments, outer segment, and CC.
Application: Vertical edging machine, double edging machine, vertical bevelling machine, shape bevelling machine,
Levels: Q5 and Q6
Performance: Even and average edge surface, small chips required following arris in size of 0.8 mm only.
JPG 167.057 byte show
Felt Wheel (Spiral or Pure Wool)
1. Spiral felt polishing wheel commonly uses for fine polishing on the last two or three positions of straight line bevelling machine, some on straight line edging machine. It works with cerium oxide water mixture to have a shining, fleek, refletive surface of bevel (bevel width from 5 mm to 60 mm).
2. Pure wool polishing wheel applies to have glass surface clear or have tiny scratch removed. It works with cerium oxide water mixture as well. The wheel density is 0.5 g/cm3.
3. Video: https://www.youtube.com/watch?v=o0djBsttFBs
JPG 152.156 byte show
Polishing Wheel
(1). On a edging machine, there are two functional polishing wheels, one is rough polishing, another is fine polishing.
(2). Rough polishing is responsible for turning the matt with lines/marks edge to be of misty one. It has some capabilities of lines/marks removal that cuts off 0.2mm edge thickness.
(3). Fine polishing is to turn misty edge to be of clear and transparent one.
JPG 59.088 byte show
Resin Wheel JPG 182.090 byte show
flat wheel JPG 38.455 byte show
Company Location JPG 80.948 byte show
Diamond grinding wheel series PDF 619.746 byte show
Polishing wheel series PDF 515.837 byte show
Glass tools series PDF 432.175 byte show
Polishing material series PDF 273.499 byte show
Machine fitting PDF 234.528 byte show